TV Above a Fireplace in Newport Beach
TV Mounting Atelier Newport Beach covers mounting a TV above a fireplace in Newport Beach homes — long linear gas units set into stone or tile, smaller masonry fireplaces in older houses and drywall-clad chimney walls — checked for heat above the opening, for what the wall behind is made of and for a screen height that does not strain the neck.
Bookings aren't open yet. Leave your name and number; your message is recorded, and you'll get one message when a local installer is available.
Illustration
Linear gas fireplaces and the wall above
A linear fireplace is long, low and often set high in the wall, which leaves a short stretch of wall above it and pushes the screen up. A gas unit also sends heat upward past the top of the opening.
| Fireplace type | What to know above the opening | Usual approach |
|---|---|---|
| Linear gas, sealed glass | Heat rises past the top; a heat limit applies | Check the maker's stated clearance, then a pull-down mount |
| Open masonry | Soot and strong heat | Keep the screen high and use a pull-down mount |
| Electric insert | Little heat, shallow recess | Fixed or tilting mount, cable in the recess |
Heat limit and a screen that comes down
A pull-down mount parks the screen above the heat zone and swings it forward and down to eye level for viewing, which solves the height problem without moving the fireplace. The swing path has to clear the front of the mantel or surround.
What the numbers show
- Wall bracket into framing The bracket is bolted into the framing above the mantel, never into the firebox surround alone.
- Gas-spring arms Two parallel arms with gas springs carry the TV's weight through the swing.
- Parked position The TV rests high above the mantel when it is not being watched.
- Lowered position The dashed outline shows the TV pulled down and forward to eye level.
- Mantel clearance The swing path clears the front edge of the mantel, shown by its depth line.
Hiding wires above the opening
With a stone or tile surround, the cables cannot be run inside the wall without damaging it. Options in order of how invisible they are: a rated run through a chase beside the fireplace, a paintable raceway that follows the surround, or a cabinet beside the fireplace with the cable passing through its wall.
- Power stays a short run to an outlet and never travels inside the wall as a plain cord.
- A new outlet above a fireplace is an electrician's job.
- Gas-line and flue areas are never drilled.
TV Above a Fireplace — common questions
How much does a TV above a fireplace cost in Newport Beach?
Roughly $224–$334 for a 32–49 inch TV on a drywall chimney wall in 2026, with a stone or tile surround adding $65–$140 on top.
Is it safe to put a TV above a gas fireplace?
It depends on the clearance and temperature limits in the fireplace and TV manuals. A pull-down mount lets the screen stay out of the heat when the fire is on.
Availability & price range
TV Above a Fireplace: check availability and price range
Bookings aren't open yet — answer a few quick questions about the TV and the wall and get a typical Newport Beach price range right here. Typical Newport Beach prices for one TV, labor only unless an option says otherwise. This is a market estimate, not a quote.